سلكين
27-04-13, 11:32 pm
السلام عليكم ورحمة الله وبركاتة،
ما كينة سي ان سي CNC مستعملة استعمال نظيف
للبيع
http://store.silken.com.sa/cnc/cnc1.jpg
للنحت الثلاثي الأبعاد والقص والحفر على جميع أنواع الأخشاب والبلاستيك والمعادن الخفيفة مثل الالمنيوم والنحاس وكذلك الأحجار السهلة الحفر مثل الجرانيت والجبس
وحفر بوردات PCB لصناعة الدوائر الالكترونية.
تعمل على برنامج التحكم Mach3 أو EMC2
ومتوافقه مع جميع برامج الـ CAM للتصميم
توصل بالكمبيوتر بكيبل متوازي مثل كيبل الطابعات parallel cable
المواصفات:
الة الحفر (الدريل) بقوة 1500 واط + تبريد بالماء (يأتي معه غطاس ماء)
مساحة الحفر: 400 × 600 مم × 60 مم عمق
باقي المواصفات:
-Machine dimension:
Depth( Y ) [mm]900
Width( X )[mm]690
Height( Z )[mm]520
-Max. working material dimension:
X[mm]480
Y[mm]840
Z[mm]≤90(the distance between Z axis and the bottom of the working station)
-Effective working travel:
X[mm]400
Y[mm]600
Z[mm]60
-Water cooling spindle Consumption: AC220V/1.5KW
Frequency: 400HZ
Speed: 0-24000rpm
-Clamping diameter : 6mm.6.35mm.3.175mm.3mm (standard configuration 3.175mm)
-Cooling way : Water cooling(we will supply the water pump)
-Driving unit:
X axis: Brand new 1605 ball screw
Y axis: Brand new 1605 ball screw
Z axis: Brand new 1605 ball screw
-Sliding Unit:
X axis: Dia.20mm chrome plate shafts
Y axis: Dia.16mm chrome plate shafts
Z axis: Dia.13mm chrome plate shafts
-Empty line speed:0-5000mm/min
-Engraving accuracy:better than 0.03mm
-Resetting accuracy:0.04mm
-Carving speed: 0-3000mm/min
-Carving instructions: G code/TAB files/nc file/NCC files
-Communication interface: Parallel port with the computer
-Machine weight: 62KG
Controller box parameter:
Operating Volt: 220V/110V adjustable
Drive unit: 3.5A TB6560 Drive board(with 2,4,6,8 Micro step). and spindle speed regulator
Switching power supply: 24V, 10A 110/220 adjustable switching power supply
Computer connection: Parallel port
Tested software (http://www.aswaqcity.com/thread1160035.html#): Mach3, EMC2
Command: G-code
Protection: Emergency button
يأتي معها بعض انواع ريش الحفر ويمكن شراء انواع أخرى
http://store.silken.com.sa/cnc/cnc2.jpg
http://store.silken.com.sa/cnc/cnc3.jpg
http://store.silken.com.sa/cnc/cnc4.jpg
http://store.silken.com.sa/cnc/cnc5.jpg
للبيع بــ 8000 ريال فقط
مع ضمان تشغيل الماكينة وإعطاء المشتري إعدادات Mach3 وبيانات ريش الحفر Bits لإستخدامها مع برامج التصميم
المكان : القصيم - بريدة
أبوخالد
0504883198
ما كينة سي ان سي CNC مستعملة استعمال نظيف
للبيع
http://store.silken.com.sa/cnc/cnc1.jpg
للنحت الثلاثي الأبعاد والقص والحفر على جميع أنواع الأخشاب والبلاستيك والمعادن الخفيفة مثل الالمنيوم والنحاس وكذلك الأحجار السهلة الحفر مثل الجرانيت والجبس
وحفر بوردات PCB لصناعة الدوائر الالكترونية.
تعمل على برنامج التحكم Mach3 أو EMC2
ومتوافقه مع جميع برامج الـ CAM للتصميم
توصل بالكمبيوتر بكيبل متوازي مثل كيبل الطابعات parallel cable
المواصفات:
الة الحفر (الدريل) بقوة 1500 واط + تبريد بالماء (يأتي معه غطاس ماء)
مساحة الحفر: 400 × 600 مم × 60 مم عمق
باقي المواصفات:
-Machine dimension:
Depth( Y ) [mm]900
Width( X )[mm]690
Height( Z )[mm]520
-Max. working material dimension:
X[mm]480
Y[mm]840
Z[mm]≤90(the distance between Z axis and the bottom of the working station)
-Effective working travel:
X[mm]400
Y[mm]600
Z[mm]60
-Water cooling spindle Consumption: AC220V/1.5KW
Frequency: 400HZ
Speed: 0-24000rpm
-Clamping diameter : 6mm.6.35mm.3.175mm.3mm (standard configuration 3.175mm)
-Cooling way : Water cooling(we will supply the water pump)
-Driving unit:
X axis: Brand new 1605 ball screw
Y axis: Brand new 1605 ball screw
Z axis: Brand new 1605 ball screw
-Sliding Unit:
X axis: Dia.20mm chrome plate shafts
Y axis: Dia.16mm chrome plate shafts
Z axis: Dia.13mm chrome plate shafts
-Empty line speed:0-5000mm/min
-Engraving accuracy:better than 0.03mm
-Resetting accuracy:0.04mm
-Carving speed: 0-3000mm/min
-Carving instructions: G code/TAB files/nc file/NCC files
-Communication interface: Parallel port with the computer
-Machine weight: 62KG
Controller box parameter:
Operating Volt: 220V/110V adjustable
Drive unit: 3.5A TB6560 Drive board(with 2,4,6,8 Micro step). and spindle speed regulator
Switching power supply: 24V, 10A 110/220 adjustable switching power supply
Computer connection: Parallel port
Tested software (http://www.aswaqcity.com/thread1160035.html#): Mach3, EMC2
Command: G-code
Protection: Emergency button
يأتي معها بعض انواع ريش الحفر ويمكن شراء انواع أخرى
http://store.silken.com.sa/cnc/cnc2.jpg
http://store.silken.com.sa/cnc/cnc3.jpg
http://store.silken.com.sa/cnc/cnc4.jpg
http://store.silken.com.sa/cnc/cnc5.jpg
للبيع بــ 8000 ريال فقط
مع ضمان تشغيل الماكينة وإعطاء المشتري إعدادات Mach3 وبيانات ريش الحفر Bits لإستخدامها مع برامج التصميم
المكان : القصيم - بريدة
أبوخالد
0504883198